Pretium Edge Module and MTP Trunks

 

Pretium EDGE® MTP® Trunks provide the backbone of the Pretium EDGE Solution. With non-pinned MTP Connectors on both ends of the cable, these trunks are designed to interface with the Pretium EDGE or Plug & Play™ modules. All trunks are shipped with strain-relief clips that allow for the tool-less installation in both Pretium EDGE and Plug & Play Housings. These trunks conform to TIA-568 Type-B polarity.

 

 

 

 Pretium EDGE® Modules provide the interface between the MTP® Connectors on the trunk and the LC duplex jumpers that will then connect directly into the electronics. The LC duplex adapters feature hinged VFL-compatible shutters that move up and out of the way when the connector is inserted. Specially designed indents in the shutters ensure that the end faces of the connectors are never touched. These shutters replace the standard dust caps that typically once removed are never replaced, exposing the interior end faces to dust particles and possible

Follow us